Quick and Dirty Unsecure tunneling on IOS

Submitted by cliff on Mon, 12/03/2018 - 14:38

This is an old post, I posted here a couple of years ago for Arjen Halma. It was the first one I found, so i'm putting it back here for reference.

interface Tunnel0
 description tunnel to other side
 ip address <PTP-IP> <PTP-NETMASK>
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip mtu 1480
 ip tcp adjust-mss 1420
 tunnel source Dialer0
 tunnel destination <TUNNELSERVER>
 tunnel mode ipip

Add additional routes for the network on the other sides ;)


Cisco 877W Configuration

Submitted by cliff on Sat, 15/04/2006 - 08:17

This post is a legacy post from my old weblog, it has been included as it seems to still have some hits. Old comments are included

As promised in my last post I promised to put some configuration online for WIFI configuration on a 877W. But first, I experienced some problems getting VLANs working on the Ethernet ports. It seems you need an Advanced IP Services IOS for this and NOT the default Advanced Security Services IOS. Remember to get 12.4(4)T2 if you want ADSL2+ support!

The relevent WIFI config snippets: